mtlmotorsport
New member
1200$ takes all, i have 2 motors h22a4 and i wanna sell right away, im building a b-series turbo so any trades will be considered!!!
im willing to trade one motor for a vtec head from a gsr or sir!!!
(please ask for details)
the motors are not perfect, but both easy to fix if your a mec. i dont wanna waist time anymore, so whomever comes first takes all!!
neither motors have trannys!!!
1x 97 h22a4 perfect head, and good block, block was resleeved with darton open deck sleeves, and head has been ported slightly, the pistons are stock but it burns a bit of oil, so either change pistons or built an all motor or go boost its up to you, its worth more the the whole package just for the sleeving!! the bore is 87mm(stock)
1x 97 h22a4 with perfect head(disassembled) red valve cover, needs a new sleeve, and piston, sleeve #1 suffered a scar from a bad piston, and a sleeve can be ordered from darton at around 75$, + install from a machine shop! apart from that its in perfect condition.
both motors will need probobly new head gaskets, because from what i know, when you open a motor its always best to put a new head gasket
TRADES ARE ACCEPTED, BUT DONT WAIST MY TIME WITH ANYTHING ELSE THAN HONDA PART, NO SHIFTERS, STEERING WHEELS, AND PEDALS, EXT.
im curently looking for b series vtec head, i already have my turbo kit, so i dont need parts for that, but i might be intrested in management, or injectors and timming stuff! send me a pm!
pm!
pm!
pm!
im willing to trade one motor for a vtec head from a gsr or sir!!!
(please ask for details)
the motors are not perfect, but both easy to fix if your a mec. i dont wanna waist time anymore, so whomever comes first takes all!!
neither motors have trannys!!!
1x 97 h22a4 perfect head, and good block, block was resleeved with darton open deck sleeves, and head has been ported slightly, the pistons are stock but it burns a bit of oil, so either change pistons or built an all motor or go boost its up to you, its worth more the the whole package just for the sleeving!! the bore is 87mm(stock)
1x 97 h22a4 with perfect head(disassembled) red valve cover, needs a new sleeve, and piston, sleeve #1 suffered a scar from a bad piston, and a sleeve can be ordered from darton at around 75$, + install from a machine shop! apart from that its in perfect condition.
both motors will need probobly new head gaskets, because from what i know, when you open a motor its always best to put a new head gasket
TRADES ARE ACCEPTED, BUT DONT WAIST MY TIME WITH ANYTHING ELSE THAN HONDA PART, NO SHIFTERS, STEERING WHEELS, AND PEDALS, EXT.
im curently looking for b series vtec head, i already have my turbo kit, so i dont need parts for that, but i might be intrested in management, or injectors and timming stuff! send me a pm!
pm!
pm!
pm!
Last edited:
