car level measurememt

zaku

zaku

Legacy Member
Where is the correct spot to measure to know if the car is leveled correctly? at the jack points behind the front wheels and in front of the rear wheels?
And i assume it must be the same height from ground at all 4 measured corners?

Thanks.
 
i've heard the fender well is not always the most accurate. and usually the front fender arch is larger than the rear so unless you know exactly how much larger is the front compared to the rear, it'll be difficult to tell.
 
You can measure off the front and rear sub frames but you need a level surface. The FSM should tell you where to measure for ride hieght. Usually center of the wheel center cap to the fender. If your off by a couple MM it's not the end of the world.

On your Maxima i'd say front lower control arm bolts and for the rear the subframe bolts.
 
You must log in or register to reply here.
Back
Top