Recherche:

shnapper27 based on the service I have received on all my cars purchased in Canada I can tell you that if you can do it yourself (even if you search and use youtube) it is way better than the average...

Do you have the riser block and what tyre do you need to use?
May be interested for my son.

Just dremmell or drill the security point out and use a regular torx

I had this with a fluid change and after getting it checked twice was told it would go away which it has. Some funny VW thing that I do not understand. Not sure if it was a pressure bleed but know...

As title states looking for 6 inch low profile sub for my Audi A3 plus an amp 4 Channel with the possibility to bridge 2 channels (smaller format preferred).
Also 6.5" components for rear fill; I...

Theoreticaly any full sythetic that meets the VW requirements for the engine will be good. I run Motul 300V or racing formula as I drive hard and only in the summer. I have tried Total but noticed...

Brakes

New or used?

I use my boost guage to try an stay off boost for the last leg of my drive (about 2-3 mins) and then can shut it off. Works better than idle as you have air flow through the engine and proper oil...

ebay is a good source

http://www.ebay.ca/itm/BRAND-NEW-OEM-US-Spec-VW-RNS-510-Navigation-RNS510-MFD3-Navi-/300740095192?pt=Car_Audio_Video&hash=item460581acd8

Sold to Me now for the Install in my A3 I need adapters:D

PM sent

As title says preferably Black Anodized but No steel; I can go to home depot and get that. If anyone has GrillCraft lower inserts I would consider them as well.

Bushings are solid on a TT and Not on a Jetta????

No one have the TT part numbers and a good place to order them as I would like to have this on in the spring. A cross reference would be great then I can see what I have to do by reviewing the...

One comment that you need to consider and I have had this argument every year since getting my Hybrid is if you are planning on going full trailer (i.e. No tents on the ends) then do it now! We have...

PM Sent

I would like to stiffen the suspension and was told that I could swap parts from the CupaR and TT; then someone said A4 parts fit but when I looked at them they were cast (much better than the Jetta...

The listing was an exampe as the A4 shares components with the R-Line and TT Golf Jetta

OK so I know many have used Audi TT bushings and I am convinced not to go Poly.

Is it possible to upgrade to Audi cast control arms and bushings from the stamped ones on the Jetta; if so what are...

Replica?
Do you have a DSG set for A3

What engine code is the ECU for and what file(s) do you have?

any idea if this would work for an A3 TDI 2013

Let me know if it falls through!

What plugs and gap were you running with these?
Are they compatible with a 1.8T AWD engine code?

LF sline Grill badge Satin and Rear Badge S, S3 (Red) or SLine Satin.
Been on eBay but would like OEM if someone has them.

Also looking for Black 4-Rings for Grill and Rear.

Well did some tests and if I remember the defrost setting will stay active when the car is turned off; I would still like to have the option to activate it from the remote start remote!!

Does anyone know if I can control the Front defog on an automatic climate control (SLine dual heat Auto control) via an alarm. A guy is doing an install and is going to power the rear defrost as an...

Thanks Nico these will be perfect for the Winter Mags; will talk in the spring for paint prep etc.

Anyone know of a set that will alow the Black Stud Caps to fit as I will need that for summer as...

Like the title states would like to be able to put a matching cap on them so they are OEM.
Dealer is Crazzzzy.

I have a set made by Momo for my MKIV that I ccan use but need another set for next...

Do you know what the install cost would be on a A3 TDI DSG Automatic?

yep on there and they also say to do the DSG tune before or at the same time.

looking to do this on the new A3 TDI but asked the dealer and found out that all engine and tranny data is sent to VW when the car is in for service. This is crazy as as soon as they see the log...

Intereseted in the Targus Cooler You still have it?

Sorted Got some nice A4 16" with Toyos for this year if I do not like the look I will be looking for 18"

Does anyone know if 2007 S4 wheels would fit 18x8.5 Bolt pattern is OK but no offset on...

Link does not work

Car will be delivered in two weeks so I need a high quality setup. Will consider OEM and aftermarket wheels but no crappy tires please.

yep but they are steel rims and I think the offset will kill the deal

Anyone know if the Subaru 16" 5x100 56.1 can be made to fit on a TT with 5x100 57.1 as my buddy has a sick deal and the tire size is perfect.

How about the offset as I have no idea what the subaru...

Is this the correct part number
Bilstein coil over kit B16-PSS10 VW JETTA IV (162)
Product No.: -420-48-135238 10.00

Go on the net and send some emails I got a 3K lower starting price in TO on two cars then neg here with that price and beat it by $500 so it can be done. This will never compare to the 5-8K you can...

I need a Mirror controller and want the new model that does not break off.
2000 Jetta.

Manufacturer Part Number: 1J1959565B01C, 1J1 959 565B 01C

If some one could help with the install that...

I have a Recaro Ortho in my garage Black leather with cloth inserts, Electric with heat and vent cost me big $$ Fixed my back and now I do not need it; food for thought.

Got the alcohol for electronics (bottle) from Addison/Maddison and a large zip-lock took about an hour to get stuff off and back on.
If that does not work I have some sensors laying arround let me...

Clean the MAF prior to changing the O2 as that was my problem and easy job. Also do a throttle body clean if you have the time to get it out. These two things may fix the idle and CEL for O2 Sensor...

Looking for a set of glow plugs for the MB 3.0 CDI that was installed in the Jeep Grand Cherokee.
Anyone have a source here in Montreal send me the price for 6

Chrysler Number is 05175756AA
MB...

Put a CAT and quite it down; also check to make shure there is a resonator on that bad boy.

Great Tires
Free Bump*tu*

I have a MKIII one somewhere with Switch (Fog)

I will pull the linkage and fix the problem; was told to start with the relay and then the linkage and motor

Yeh but this car is not in the rain often and not winter driven so I would like to start with the simple stuff first.

I am looking for a relay or someone who has a MKIV, without rain sense, to swap the relay in my car to test to see if that is my issue prior to pulling the wiper assembly appart.

North shore...

Well life must be very confusing for you!

Got the real deal on my wrist!!

Got it!
If you are looking do not go cheap as I scrapped two sensors with a $15 tool as it expanded an spun!!

No one got a spare?

Got one ticket in tribune 31 third row if I remember corectly.
Make me an offer!

title says it all will trade for the stock.
Must have a good summer/4-season tire!

I think 16" may do it as well

Go see Dr. John lyons here http://www.drsourire.com/
he is ahead of most in terms of treatment; I drive from Blainville to see him and I have a lot of experience with good and bad dentists.
Close...

Still looking for Both, Narrow Band AWD engine code!

And a socket or someone who can help me get them Off

So looking for a place to do my diffs and transfer case oils (Full sythetic) and a brake blead.
It has Quadra-Trac II and Electronic Ltd Slip front and rear diffs, with a 3.0L CRD
Would like to put...

I have one but no papers, tube frame, New discs brakes all round, motor, partial body, new tires on chrome rims. Needs a cluch, pedals, widshield, lights and some other stuff; has been stored in my...

Buying new is no problem but a lease would not be easy.
I looked at an outback and would have saved about 8K over buying here.

As title either to buy or someone that can remove a couple of O2 sensors from my VW down pipes.

Impact tools would be better.

Subaru = US purchase and you will save big $$$

Well Vag Com gives you a detonation per cylinder so I would imagine it is the knock sensor output.

VAGCOM scan showed the sensors operating within normal parameters yet the car still does not accelerate properly. Get some detonation codes any ideas or is the CAT Less pipe no good?

looking for...

Is there a good place to get Glow plugs for my 2008 Jeep GC with the 3.0 CRD engine. I have the Bosch number but do not want to pay $50.00 each when I can get a set (6) from the UK for about 60...

I need a cross reference from VW 1K0998262 to Bosch or other Front O2 on an AWD and Rear on AWW.
Also need cross reference from VW 1K0998262Q Rear AWD.
Narrow Band 4 Wire Sensor.

Yeh I know the 5 wire is a wide band but had seen some conversions done and was wondering if it is worth it.
Funny you say do not splice as many people have purchased generic O2 sensors and spliced...

Thanks Dude Runs Perfectly.
The COM port was not set properly!

So VAGCOM tells me that the O2 sensor, Heater, CAT is wacked and I have bad idle.
I have another DP with sensors installed (may be rusted in there) of a 2000 Golf but the front one is 5 wire while I...

So I have a generic USB-Serial interface and am trying to use it on my 2000 Jetta 1.8T (engine code AWD) and it will not comunicate.
My new laptop gets an error and my old laptop recognised the...

some interest for parts; going to scrap today or latest by Wed unless I can get it home!

seats are clean Beige interior.
Running well 2.0L with low KM.
Scrap is comming Monday so make an offer!

Yes forgot to mention

Going to scrap this week so if anyone is interested make me an offer as I would rather sell it here than to the scrap.

Going to junk some one want this for $350, car is rusted, windshield cracked at bottom, brake lines shot (needs to be towed). Still plated and insured so can be fixed or parted. Engine has 160K and...

I am looking for a new one or even a new set (the car only has 85K on it so i am sure the ones there are good).
This is all because of the stupid flex pipe failing; pipe and everything else looks...

So I think the secondary (rear) is welded in and I will need a new one.
Any tips on how to get it out; I have used liquid wrench and a small torch but no dice. The front one came out with one wack....

no issue there as i asked the question first.
This is more so I can get it home and then sell it off!

Thanks will try that on Friday

So it looks like the golf has to go soon.
Would like to sell for the engine and parts as I do not have time to part out unless you come take stuff yourself.
It has the tinted tails, fogs and all...

So the car is maybe beyond worth it to fix for a couple of weeks of winter but if I can find the spec on the fitting I can put that bolt in and drive it with 3 channels just to get to work. Any one...

What is a CAT Less DP worth used?
Non Stainless basic.

got a spare switch and harness and if I scrap my Golf will have a set to sell

Yeh I do not pay attention to their BS but have never had the car on a lift yet.
Just figuring out the transport and then I will get her done.

Bigest part is the bleed after as I have no...

Yeh been around this subject for a long time and just can not find the right combo with a good price and reliability. Like I said the car is rock solid and runs perfect with the exhaust and intake...

Thanks now I need to find a dolly so I can get it to my buddys shop

Are these cheeper than the dealer?
The dealer cautioned me to be carefull with the fuel line that is held in the same bracket.

ALSO looking for a pressure bleed kit!

Any Idea on the fitting that I need?
Also I was told I can block off the channel at the Master Cylinder but need a special bolt (so I can drive the POS to be fixed). Do you know what the spec on...

How hard is it to change the solid line to the pasenger rear brake drum. Is this a pre-formed part and what will it cost.
Level of difficulty?

Oh yeh I have an Turbo Inlet Pipe and lower pancake pipe (nuespeed Round). Got their chip as the others at that time were not smooth and were plaged with reliability issues; it has been rock solid...

Got a Forge DV, Will be adding a Forge Carbon Fiber CAI (Running a K&N Drop In), Neuspeed Chip, and have a Magnaflow 2.25 with CAT Less DP (I would like to have a CAT) to go on this spring (was...

Still undecided on the Turbo upgrade or just get a real sports car and be done!

Dom what is your number based on as I am not out to throw money away.
Crazygreek are you listening to hype about FMIC performance or do you have some real independant test data.

Companies trying...

Good quality and proven perfomance only.

Considering Dual Side Mount Like Audi or FMIC Kit.

As in Title; looking for a buddy give me your prices.

Need to know what else I would need to set this up on a 3.0CRD?

So I got the wife a new car and called about insurance (3 cars a trailer and house been with the same company since 1989) so my company will not do replacement cost at all, as it is a Convertable and...

Anyone had or have an ABD FMI and what would it be worth used?

If I had not just got my Panerai Luminor Marina I would have considered this.
Nice Time Piece GLWS

Interested in the Methanol Injection what size tank do you have?

Not sure what I will need if I get a Fiat 500 4x98 and want to fit 4x100 I have sitting in my shed. I do not know the thread or length where can I find info on that?

Just picked up a 2.5" Magnaflow Cat Back with CAT-Less down-pipe so that is all I need to get running for the summer then decide on new car or Turbo upgrade (leaning toward this...

Still looking clear out ya garage.

I can do it myself.

PM sent 90Bora2.0

PMed Agtronic for info on fit on my Jetta; thanks for the Clutch BTW
Amazing setup should be mine if it fits without too much $$$

Post edit done; still need rear shocks and full set of wires.

Hope to get some stuff Monday will edit the post then.

Yes mkIII 2.0 beater

Looking for a tune-up kit; wires, plugs, for my POS so no crazy prices.

Also need shocks, struts and again cheep; any other bushings would be good.

Found it all in Ottawa for arround $60 but if...

Interested in selling the Camo Rims give me a price and what tires/condish they are; also details on hubs and spindles.

pm me with the issues as my car is mint with only 85K and I do not feel like f'n it up for 45HP

For sure I will do the DP & Full Cat back system, also will probably get a FMIC at the same time I have all the pipes disconnected; I have a Forge DV Valve and Neuspeed Tubo Inlet pipe so that should...

So I have a shot DP and that may signal the time to go Bigger Turbo

The question is with the AWD engine code some people are telling me that I do not need bigger injectors (do I need a 45psi...

Any one seen any good Black Fri sales??

Took a look but did not find a Cat'ed system and Neuspeed is close on price when you factor the crazy shipping some are asking.
Any sugestions would be apreciated.

Anyone??

Still looking

Bump

Well the DP let go and the car sounds like a truck.
Need a Turbo Back Stainless looking for a twin tip exhaust pipe.
Stock Turbo so nothing too large.

May consider a K04 swap full kit.

You can get a Sport with Leather?

do you still have this and if so how old is it?
I looked and think it is full sized? correct?

sent an email for xtr cassette!

http://montrealracing.com/forums/showthread.php?752862-FS-iphone-4-32gb-s-locked-to-telus-or-trade-for-same-locked-to-rogers

Build sheet states the following:
5-Spd Auto W5J400 Transmission
Quadra-Trac II Full-Time, Active 4WD
200mm Front Axle, 3.73 Rear Axle Ratio
213mm Rear Axle
Elec LTD Slip Differential Rr/Frt...

Do you guys know what diffs I have and what would you recomend for an after-market cover. I do not need anything bullet proof as I have full skid plates and do not go off road too far. I am...

Any winters on it?

Pm is blocked is this still for sale?

I have a deflector painted Silver, MINT Never installed.
Cost Me Around $150.00 make an offer

can this work on Rogers and if so does it need to be unlocked ? $$?

If it is anodised it will be fine, or just install it with a sealant!

original with levelers or projector retrofit?

what car are they off and are the tires included?

where are you located I need a MKIII Drivers Wolfie fender (With symbol/markr light hole no antenna) and a side marker light for the bumper.

You are probably 100% correct; locate the ground point on the drivers side rear fender inside the trunk (May be one on either side I can not remember) and ensure that they are clean.* Second run a 14...

Offset? Center Bore?

Could use a spare for the Jetta

I have a set of steelies 4x100 14x5.5 for $50.00 No tires.

do you need extra service for two boxes?

PM sent

1x 512 ddr pour portable 25$

Any chance this will fit a Compaq Armada 1700?

4 14 inch Volks Imola Mags

No tires/No centers; good shape.

6J 14H2 4x100 ET45 CB 57.1

p/n SS 1H0601025D

PM sent

LF Rims for winters 4x100 14"

and winters 190/60/14 or equivalent with or without rims.

X-Ice still available

Just Called and these are SOLD; not to me SH**?&T ;-(((

bump OFFERS?

approx 8-9/32 one winter not mine; selling for a friend. No rims

$120.

up

sell them or just give one to Karim E36

Don`t pollute other peoples threads

bump

Just droped them to $100

Just the caps are worth at least $40.

bump offers

bump

Bump

$100.00

bump

bump

$100.00

bump

bump

where is this and is it the same specs as Best Buy.

Receipt for waranty?

Offers on x-Ice

http://forums.montrealracing.com/showthread.php?t=490858

Will trade for 185/60/14 or 185/65/14 or 195/60/14 winters (plus $$ if needed)

bump

Are they race or X balance system skis?

Bump

Still Available

sill available

X-Ice still Available

got my oddy wheels but these need to go.

I still need 195/60/14 winters for my Golf (185/65/14 good also).

what does it cost to paint these?

yes the carriers

Callipers and rotors, pads from a TT225

I have everything but the brackets if you are interested.

pm sent

Non Brembo Kit 4 door need front rear Rotors, Pads and Install (flush, Lube etc)



Give me your prices

front and rear ?



You listed the Front Only



SWAY BAR BUSHINGS, FRONT

bump

tire size and are these all the same width or staggered?

with tires or just mags?

Yes I have two

be rediculous you may get a deal

pm answered

Summer Pirelli good for one summer $100 SOLD!!!!!!!!!!



Winter Mich X-Ice used one winter $500 OBO



Van got stolen so these have to go! Make me some offers:(

Offset and tire make model

still for sale

Got to go

Got to go

I have the following for sale



Viper RPN 478V/P/C, FCC ID EZSDEI478

Check this link 478 2-Way Responder DEI Replacement Remote

Some scratches normal use $60.00 (Was working last time I...

I have the following for sale



Viper RPN 478V/P/C, FCC ID EZSDEI478

Check this link 478 2-Way Responder DEI Replacement Remote

Some scratches normal use $60.00 (Was working last time I...

Bump

I have a set of Michelin x-Ice used for 8000Km one is almost new as it was changed.

Van got stolen and they do not fit on the new one. Paid over $800, give me an offer

Still available



Looking for 16 5x129 and 215/70/16 winters for an Odyssey

PM Sent,

Are these still available

Pm Sent!!



You Sure it was a 2005 because 2005 and up were 5x120 and that is what I need.

tire size?

It`s comming get ready

get up

try aquariumpros.ca