What is your $20,000 car project?

Status
Not open for further replies.
T

Thundergod989

New member
Just like the thread says, you have $20,000 to spend on the car + mods, name which car you would get, why, and what exactly you would do to it. Try and be specific with the parts/prices if possible.

Other than that, anything goes :D

As for me, it would be a

Car:
91 z32tt 2 seater(~$13,000 if you shop around)
Why:
'cause i'd sell my soul for it

Mods:
Borla Stainless Steel Cat-Back System (~$1000)
Eagle ESP H-Beam Connecting Rods(~$600)
Arias Pistons and Rings (~$700)
Jim Wolf Technolgy ECU (~$650)
Stillen Side-Mount Intercoolers (~$900)
Apex-i Twin Chamber Blow Off Valve Kit (~$350)
NISMO 740cc Injectors(~$140)
JWT Sport 700BB Turbochargers(~$3200)

(slightly over budget, yaya, I know)

Should be good for ~600rwhp at 17psi.
 
I'd like to restore a ~1980 Camaro shell and drop a cammed LS1 in there.

something like this:

img001.jpg


img138.jpg
 
Probably something RIDICULOUSLY STUPID. Get an LS7 and make a MidEngineDrive RWD Civic...Like a 92 HB for 1500$ then the rest of the 18.5k on the engine and how to get an LS7 engine in the backseat of that HB, and etc etc you get the drift.

All my domestic friends will be like "MiKe why in the fcuk did you buy a rustbucket shitvic" and Ill be like "Wanna race my LS7 Civic :D ?" Half the weight with twice that JDM power :D:D:D I can finally be rice ! :bigup:
 
Dubweiser said:
I'd like to restore a ~1980 Camaro shell and drop a cammed LS1 in there.

something like this:

img001.jpg


img138.jpg
Click to expand...


nice project that would be but 20k isnt near enough, we counted how much parts r for lets say a cavalier, just parts one by one pricing comes out to over 100 000$

my project wouldnt be a car, BUSA!!!!!! TTTTTT lol
 
i'd make my own car with tubular frame/awd setup and 2 seat
WAIT , actually im starting to make it :run:
 
mustang gt 88...4000-5000$
351W...disons 2000-3000$ mais je revend le 5.0 pour un ptit 500
bolt-on pour le W...7000$
brake suspension diff...le reste
 
Caprice Brougham 1987 ->400$
350cu 2 Barril avec TH400R ->0$ freebie, zip, Zero, NADA
Intake 4 barils + Carbu elderbrock le tout flambette nickel-> 750$
Suspension hydrolique ->???
Supercharge ->???
Mags monter sur du 20" ->3500$

Tk, je me suis pas informer encore pour certaine pièces... mais si j'aurait 20000$ a jeter par les fenetres je ferait faire une peinture neuve noir avec un air brush, Tv+DVD et systeme de son au complet. Mais sa va etre dans mes rêves sa lol

Pourquoi ste char la? Parce que j'ai toujours aimer le confort et les gros bateaux. si sa l'aurait pas ete un caprice, j'aurait prit un Chevelle ou un charger avec un blower mais la c'est trop rever sa lol
 
moi je garde ma cavalier ( je sais je sais s't'un cavalier)
je lui fait le sawp pour un 3.4 de grand am gt et je le met turbo. avec tout les internes forgés et assez fort pour supporter un bon boost. Avec une belle paint job.
 
Moi j'opterais pour le 3.8 supercharge de grand prix mais sa doit etre quand meme assez fou pareil un 3.4 turbo*tu* ... jme demande si qqun a deja fait sa??? tk moi j'en ai jamais entendu parler!!!
Chevy_cavy_95 said:
moi je garde ma cavalier ( je sais je sais s't'un cavalier)
je lui fait le sawp pour un 3.4 de grand am gt et je le met turbo. avec tout les internes forgés et assez fort pour supporter un bon boost. Avec une belle paint job.
Click to expand...
 
2 choice for my 1984 s10


#1 drag set up

383stroker ,afr 195heads,vic jr intake,mighty demon 850,forged rotating assembly,aftermarket block. vortech s-trim 15psi 850+crank hp.th400 trans brake 4,10gears,ford 9"

4link rear suspension ,325 50-15 drag radials.

#2 street set up

ls2 404stroker forged rotating assembly,cam ,heads,intake 550+crank hp on motor t56 6speed,150shot nitrous 4.10 or 3.73 gears,built ford 9".

4link rear susp 325 drag radials on weld pros stars
 
ysrfreak said:
Probably something RIDICULOUSLY STUPID. Get an LS7 and make a MidEngineDrive RWD Civic...
Click to expand...

Ah ! i was gon say LS1
(4000$) powered Jetta coupe 1990 (1000$)... RWD Mid engined... with lets say 450+ WHP ... dang... i really wonder if someone would have the balls to do it one day ...
With most of the weight in the middle , good car for racing ... im sure id b a Track monster
15 grand to fit the engine and add some NA goodies :D
 
I'd get a 1999 2.5RS with a lot of miles for 10 000$ then drop the VER 7 STI engine that revs to freaking 8200RPMs!
 
Status
Not open for further replies.
Back
Top