LED - Where to buy in Canada ?

altivec

Legacy Member
I know US is cheap but don't feel like having the border fee surprise.

I don't know crap about LED and all crap around it but if i get recommend the correct stuff i'll figure out the install without a problem.

Here what am looking for:
* Multi-color strip (RGB) (~30cm each)
* AC Adapter
* IR On/Off Capability with color control
**** OPTIONAL ****
* When needed i would like to have light dimmed by the music from my amp (Denon AVR-790)

It's to install behind a TV (TV is 46", i would probably install 2 stripe of 30cm, one top and one at the bottom.)

I found this device to have ON/OFF, Color Control et Music dimming but it's a build-in MIC so it would react to sound in the room also and not only the music.
1282286654826_hz-myalibaba-temp13_2486.jpg


I do not want RF Remote, i want IR so my Logitech Harmony can lear the control and have the LED included in my activity programming. Exemple:
- When watching TV/Blu-Ray/Other LED will be on 100% at X Color
- When listening music LED will be on and dim by following the music

I would like something that don't end up at 200$
I found Canadian supplier that have 5M RGB LED Strip but i don't feel like spending 85$ for that either.

Thanks for the help!
 
Tu peut pas avoir un meilleur prix que sur Ebay. J'achete tout mes led sur ebay et sa coute vraiment rien. Ces pas des strip déja fait parceque on construit tout nos module nous meme mais j'imagine que sa doit etre pas mal moin cher des strip deja fait aussi sur ebay
 
For buying just the LEDs check out digikey, I've never had a problem with them 8$ next day shipping.
 
get the ikea dioder. not the new ones single color bars, but the old round "buttons"

You can probably find them on ebay
 
i'm interested by this setup altivec, keep us posted, i wanted to buy something like that a while back
 
Tu peux toujours utiliser des LAMP DIMMER X10, tu peux surement te pogner un recepteur IR et les dimmer X10 pour genre 50$ sur ebay. Le transfo de tes LEDS doit être non-régulé si possible, les transfos cheap sont pas régulés d'habitude, anyway c'est écrit sur le transfo. Je faisais ça dans le temps pour allumer et dimmer mes leds. Tu mets un dimmer et un transfo par couleur.

Le lamp dimmer que j'utilisais c'est un LM465 mais n'importe lequel va marcher(8.60$ chaque, shippé par usps sur ebay)
Le IR receiver que j'ai c'est un IR543. (23$ shippé par usps sur ebay)

J'utilise un setup x10 avec ma harmony depuis des années.

Pour dimmer en suivant la musique ca va être pas mal plus compliqué si tu veux controller ça avec du IR, la plupart des modules que j'ai vu avec cette fonction là avaient des remote RF et fonctionnent avec un micro. J'en ai pas vu avec un high-level input encore mais j'ai jamais cherché pour ça spécifiquement...
 
Last edited:
the bar lighting kit looks interesting but what is its sensitivity to sounds? Will it work with tv speakers or you need LOUD noise?
 
That why i don't want a microphone kit. Anyway i don't want light dimmer with TV, only with music so i would like some RCA or other Input from AMP>Sensor.

But from what i saw of people with such system in Car it didn't look that good so the "music" part will probably be put a side.
 
Last edited:
This is what i have if your interested in the same set up i can give you my electricians name and # and he can set it up for you. They are 3M taped to my tv pluged into the wall and work off a switch.

Labour and material cost me $125.00, very clean job!

DSC06909.jpg


DSC06911.jpg


DSC06910.jpg


DSC06912.jpg
 
Y'a ce kit la qui est intéressant pour le prix:
http://cgi.ebay.ca/LED-RGB-5M-strip...ultDomain_2&hash=item3366e3163c#ht_861wt_1141

Un gars du Québec il à une compagnie:
http://www.futurvert.com/

Je l'ai contacté via sont site internet afin de voir si je pourrais avoir exactement ce que j'ai besoin, j'aimerais bien que tout les adapteur et module reste dans mon meuble bas ou est tout installé et que seulement le cable d'alimentation pour la série de LED passe dans le mur.... on va voir ce qu'il me propose et le service qu'il offre, vue que je risque d'avoir besoin de 1.5/2m de câble entre l'alimentation et la première série de LED.

Voila le salon donner une meilleur idée:
ht_2010.jpg


Je préfère de loin donner de la buisness à un gars d'ici avec qui je peut avoir ce que j'ai besoin que de dealer avec un no-where au USA qui va se cal*sser de ce qu'il me ship dans la boite.
 
This is what i have if your interested in the same set up i can give you my electricians name and # and he can set it up for you. They are 3M taped to my tv pluged into the wall and work off a switch.

Labour and material cost me $125.00, very clean job!

Nice setup, look clean.

I have more that enough experience in electric or wiring to do it myself. So i am more looking for the parts themself.
I prefer local place that US online stuff since i have paid so many border fee in the past (even with USPS).... and honestly paying 150$ for 5m (which i don't even need that long) i just don't feel like it.
 
Back
Top