FS/FT: Built/Boosted H22a CB7 374WHP

mozznadherb

New member
Hi there, I am new to this forum, but not new to the Honda world. I am a member on Redliners here in Ottawa/Gatineau, CB7tuner.com, NWP4Life, Honda-Tech, etc etc...

Up for sale is my baby. This was the first car I owned and as you can see a lot of time and money has gone into this car. It's built for the strip/street (as I live close to Luskville Dragway) and the new motor has less than 5000km's on it. It runs perfectly, no problems at all mechanically. The outside is nice as well (for a 1992). The carbon fiber hood has faded and there are some minor dings, but overall in great shape as I havent winter driven the car since 2004.

Below are a couple of pics and the specs of the car. I am asking $6500 or a trade. I am selling this car because I no longer go to the drag strip and I have another summer car, so this one just sits in the garage. I am looking for a good car to take lapping. Best bet is to text me 613-299-4081. Car is Quebec plated. Thanks.

Note: The picture of the engine below is from the old motor. The new set-up looks the same just with a different valve cover.

Dan

0017_dan_accordwarrior_0013_800.jpg



0017_dan_accordwarrior_00014_800.jpg



0017_dan_accordwarrior_0016_800.jpg



0017_dan_accordwarrior_0017_800.jpg



0017_dan_accordwarrior_0018_1200.jpg



0017_dan_accordwarrior_0023_800.jpg



0017_dan_accordwarrior_0022_800.jpg


0017_dan_accordwarrior_0020_800.jpg


accordwarrior_0009_1600.jpg



accordwarrior_0008_1600.jpg



accordwarrior_0007_1600.jpg



accordwarrior_0006_1600.jpg


Car is currently making 374whp/298ft lbs tq at 15psi. The engine has less than 5000km on it. I built this car to race and just havent had the time to do so.

HEAD
-1993 JDM H22a DOHC VTEC
-skunk2 pro series stage 1 cams
-skunk2 pro series cam gears
-skunk2 pro series valves
-skunk2 pro series titanium retainers
-skunk2 pro series valve springs
-skunk2 pro series intake manifold
-skunk2 pro series 68mm throttle body
-custom painted valve cover w/ cut outs for cam gears
-3 angle valve job
-Cometic head gasket
-ARP main studs
-hondata intake manifold gasket


BLOCK
-JDM h22a block
-Mahle Gold Series 10:1 Compression/Stock Bore
-Eagle Forged H-Beam Rods
-ACL Main Bearings
-ACL Rod Bearings
-ARP Rod Bolts
-Balanced and Micro Polished Crank
-Kaizen Speed Balance Shaft Eliminator Kit
-New OEM Water Pump
-New OEM Timing Belt
-H23 Manual Tensioner Conversion
-ARP Head Studs
-Moroso Oil Pan
-Moroso Oil Pick-Up

TRANSMISSION
-H22 transmission M2A4
-Stage 4 Bully clutch
-rebuilt w/new synchros in 2009

TURBO SETUP
-Garrett T3/TO4E 60-1 turbo charger
-Custom built tubular turbo manifold made by PSI Tuning
-Yonaka intercooler
-Custom 2.5" charge piping
-Apex'I dual chamber blow-off valve
-Tial 38mm external wastegate
-RC Engineering 750cc injectors
-Hondata 4 bar map sensor
-K&N air filter
-3" custom downpipe made by AEC
-Custom 3" cat-back exhaust made by Initial Tuning
-Hi flow cat converter
-Vibrant flat black 3" inlet/outlet muffler
-Moroso overflow tank
-AEM fuel rail
-Fluidyne 38mm half sized radiator
-13" Spal high performance radiator fan
-Mugen radiator thermo switch
-DEI heat wrap
-MSD 6AL-2 Ignition with rotary dial 2 step control and rev limiter
-MSD Blaster SS Coil
-NGK BKR7E spark plugs
-Walboro 255 fuel pump
-Explicit Speed motor mounts
-Chipped and tuned p06 ecu with Hondata s100 by AEC here in Gatineau

Interior:
-Forbidden BB4 short throw shifter
-Stewart Warner Boost Gauge
-Stewart Warner mechanical oil temp gauge
-VEMS Wideband air/fuel and EGT Gauge
-Greddy Full Auto Turbo Timer
-ProForm adjustable shift light
-Corbeau Forza seats
-Corbeau seat brackets
-Momo Apache steering wheel
-Momo Hub
-Vibrant blue shift knob
-Vibrant leather shift boot
-Eurolite gauges

Exterior:
-JDM 1 piece headlights (blackhoused)
-Xenon HID's 6000K
-S JSP carbon fiber hood
-Mugen style front lip
-Red/clear tailights
-New aftermarket flat black bumper

Suspension/Rims/Tires/Brakes:
-JDM 1996 Championship White Integra Type R rims
-Yokohama Advan AD08 205/50/15....on the front
-Falken Ziex 912 205/50/15 tires...om the back
-Brembo blank rotors
-Hawk HP plus brake pads
-KYB AGX adjustable shocks
-Ground Control coilovers
-Ingalls camber kit front and rear
-A1CVTech upgraded axles
-Explicit Speed Traction Bar System
-Megan Racing upper front red strut bar
-many Energy Suspension bushings

In Car Electronics:
-Pioneer DEH-P4000UB H/U with Sirius Satellite radio
-2 6x9 Alpine type R speakers in back
-2 6.5 Alpine type R speakers in front w/tweaters
 
Last edited:
car is most likely being traded this week, would rather sell it and pay for the other car in cash...I'll let this go cheap, if you are a mechanic or want to part this out you WILL make money
 
hella set up for 4500 :0 thruely sleeper Bump had may wish to buy this and swap the block into ma 6th gen than swap my h22a into this one :p
 
Back
Top