Need some help

0

04civiclx

New member

• Feb 23, 2013

• #1

I have a 90 mr2 and I did the 2gen swap 3sgte and I have no spark the motor cranks but no fire

 

Evan666

Member

• Feb 23, 2013

• #2

check to see if the ignitor is getting power. check to see that all your grounds are grounded.

 

0

04civiclx

New member

• Feb 23, 2013

• #3

It has power but no power coming out of the coil and it cranks and no spark. I had it a garage and he told me that all ground were good

 

Evan666

Member

• Feb 23, 2013

• #4

check fuse and check to see if the crank/cam sensor is working and theres a single to PCM

 

0

04civiclx

New member

• Feb 23, 2013

• #5

Yeah the cam and crank sensor are fine dues are fine and there is signal from the PCM

 

Gothmog3VZ

New member

• Mar 7, 2013

• #6

Run an extra ground wire to the igniter. That was the issue on my 1.5 even though the existing ground looked good (had a 91 3s swap).


Sent from the 80's using 4A-GE