400$ Track car build Turdcel Inside"

This is for all the haters..... lmao... flame suit on.



I am back again. oh boy this is fun.

15x8 0 offset

225/45-15 nitto nt01 shaved

ground control coil overs / gr-2's

stripped of all interior / spare / bolts / plastic / sound deadening / power steering....etc...

Corolla Big brake upgrade

Special 298k kilometer oil burning smoke screen device. (Blow by)

As of last Weekend

samedi soir au time attack driftthing nights.


with the 400$ tercel
300,000 kms - rings are toast.
195/60/14 falken ze512 - dry and cracking (sat outside in the sun for 6-7 years maybe more)
stock kyb gr-2's with blown top plates. (use 2 big metal washers... and it sort-of works...lol)
Ground control coils (adjustment collar bolts are seized and stripped..)
cat delete and 5$ short ram intake
corolla calipers & mx-3 discs in front. (Custom el cheapo bbk)
all extra's removed. (radio and heater remain)










next event will be with the NT-01's and camber adjustments, control arm frame brace and stock paseo anti-sway bar.






the 2nd week i had it i pulled the blown shocks and threw on the 125$ used kyb gr-2's and cround control coil over combo.



then test fit the track wheel and tire combo... hella rub and bump style.









if fender roll is needed and you're a cheap ass like me.... use the old shocks.



finished product =



streetable product =



and to fit in with the ti-counes / ricers out there. and cause this car was a joke project to begin with....

in.

darkestfenix said:

in.

Click to expand...

x2

in.

In.

sick

in.

in.

muhfukken in!!!

Looks cool.

In!

I'd rather read about this than somebody who buys expensive parts and gets a shop to install them all, any day.

sweert build brah, would revisit, reread and tell my grandkids about

Sick

bump - new info. and results.

Haha that's sick man!

note:

do not use tow-bars with tercel's. they tow very well. the tow bar is great.. the 4 m8 x 1.5 bolts holding the bumper reinforcement to the frame rails and the metal itself... like aluminium foil.

the front bumper reinforcement isn't strong enough.... enough said.

i pulled the front off the car.. literally. nothing a few tie wraps can't fix ..

I like where this is going...

I somehow find this is cool!

love it tj

tj_trd_paseo said:

note:

do not use tow-bars with tercel's. they tow very well. the tow bar is great.. the 4 m8 x 1.5 bolts holding the bumper reinforcement to the frame rails and the metal itself... like aluminium foil.

the front bumper reinforcement isn't strong enough.... enough said.

i pulled the front off the car.. literally. nothing a few tie wraps can't fix ..

Click to expand...

ahAHHAHA that made me laugh. a lot.

Nice build/joke/original project